MAMBA F722 APP F50BL32 3-6S Flight Controller Stack

  • Sale
  • Regular price $159.90
Tax included. Shipping calculated at checkout.


MAMBA F722 APP F50BL32 3-6S Flight Controller Stack

SPECIFICATIONS:

FC Specifications

  • MCU: 216MHz STM32F722RET6 32BIT
  • IMU: MPU6000
  • Barometer: No
  • OSD: BF OSD
  • Blacbox: 16M Flash Memory
  • Uarts: 6Set
  • ESC Soft: Dshot300/600/1200
  • ESC Telemetry: RX6
  • LED indicator: Blue&Orange for FC Status,Green 9V,White 5V,Red 3.3V
  • LED Controller:BF LED/MB LED( 4 Set 2812 LED)
  • WIFI: SpeedyBee APP
  • Smartaudio: Yes
  • Buzz: Yes
  • Input: 3~6S Lipo (12.6~25V)
  • TVS Protection: Yes
  • BEC: 5V 2.5A & 9V 2A (Max 3A)
  • MOUNTING: 30.5mm/M3 WEIGHT: 9g

Supply :

  • 8pin sh1.0 *1
  • Smartaudio: Yes
  • Buzz: Yes
  • Input: 3~6S Lipo (12.6~25V)
  • VTS Protection: Yes


ESC Specifications:

  • F50 BL32
  • INPUT VOLTAGE: 3~6S Lipo (12.6V~25V)
  • CONTINUE CURRENT: 50A×4
  • BURST CURRENT: 60A (10S)
  • BEC: NO
  • ESC Dshot300/600/1200
  • MOUNTING: 30.5mm/M3
  • Supply : Panasonic High Frequency 470uF/35V
  • Mounting: 30.5×30.5mm,Φ3
  • Dimensions:
  • Weight: 22g

      INCLUDES:

      • 1x MAMBA F722 APP F50BL32 3-6S Flight Controller Stack

      Notes:

      Firmware Target /Config: Mamba F722 I2C
      About WIFI APP
      Diagram Link From Help Centre Link
      Since STM32F722 heat large , please leave at least 5mm interspace at both sides of the FC with nothing covered to make sure a good air circulation.

      Update Details:

      • BT to WiFi
      • USB power supply can use receiver, OSD
      • Add a group of I2C pads (SCL SDA)
      • Add inverter Dual-Way TX serial port
      • Add 2812 LED switch function, key can turn off led
      • Add 4 corner LED interface to support BF led and Mamba led
      • Upgrade to stronger type-C, optimize pad position

      Wiring Diagram:

      F722 APP MK1 50 BL32 Diagram