iFlightRC Nazgul 5" 4S FPV Drone - PNP

  • Sale
  • Regular price $319.00
Tax included. Shipping calculated at checkout.



Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!

FEATURES:

  • 5mm arm design for more durability
  • Easy-Swap arms
  • LED illuminated Logo
  • XING-E 2207 motors and NAZGUL 5140 props
  • 5" version also fits 5.1" style propellers
  • Popular True-X configuration
  • TPU crash-guards
  • Fits both 30.5x and 20x stacks

SPECIFICATIONS:

  • SucceX-E F4 45A flight stack
  • XING-E 2207 FPV Motor (6S 1800KV / 4S 2750KV)
  • Wheelbase: 240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 393.4g (without battery)

FC // SucceX-E F4 Flight controller

  • MCU:STM32F405
  • Gyro:MPU6000
  • Betaflight OSD:YES
  • Blackbox:8MB
  • 4X Uarts(1 2 3 6 )
  • 8 x Dshot/Proshot/Oneshot output
  • 8 x individual ESC power/ signal pads
  • 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
  • VTX telemetry: YES
  • WS2812 led Strip:YES
  • Baro:No
  • Beeper:YES
  • Input:2-6S(Max 8S)
  • BEC:5V/2.5A cont
  • Firmware target : BETAFLIGHTF4
  • Mounting:30.5*30.5mm,φ4mm with Grommets φ3mm
  • Dimensions:36*36mm
  • Weight:7.6g

ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

  • Dimension: 40*43mm
  • Mounting Holes: 30.5*30.5mm/Φ3mm
  • Weight: 14.4g
  • Supports 2-6S Lipo input
  • STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware
  • Current sensor: YES
  • BEC: NO
  • Supports: DShot150/300/600/1200/MultiShot/OneShot etc.
  • Target: G-H-30 BLS 16.7

VTX// SucceX Force 5.8g 800mW VTX Adjustable

  • The output power is stable;
  • Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;
  • Output 48 frequency points,
  • Frequency lock fast, the boot does not interfere with companions;
  • Built-in output power self-check function;
  • Full format video format: NTSC /PAL;
  • Wide input voltage range. low power consumption:
  • 7V~36V,+12V/380mA@800mW;
  • Small size:36*36*3mm
  • Mounting holes 4-M3
  • Lightweight: 7.2g(excluding antenna)

INCLUDES:

  • 1x iFlightRC Nazgul 5" 4S FPV Drone - PNP
  • Prebuilt and tested Quadcopter
  • 1x XL5 V5 Frame
  • 1x Caddx Ratel, 2.1mm lens camera
  • 1x Albatross RHCP SMA 5.8g antenna
  • 2x Sets Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
  • 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
  • 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

Notes: 

  • Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
  • To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
  • Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
  • Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

FPV REGULATORY NOTICE:

The use and operation of this type of product in many countries may require a license and some countries may forbid its use entirely. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Custom Quads cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.