• Sale
  • Regular price $169.00
Tax included. Shipping calculated at checkout.


  • F7 Support both dual ICM20689 gyroscopes to work simultaneously, Exquisite and perfect flight experience
  • Innovative soft damping design, suitable for most frame, ensures flight control and gyroscope without noise
  • Simple installation method, compact space
  • STM32 F405 MCU or STM32F722RET6 MCU
  • Newly upgraded BLheli_32 ESC, high-speed operation, 35A stable working voltage, maximum 45A (3 seconds)
  • Support 2-6s battery and current meter
  • Support blackbox and use 32M on-board flash storage
  • 8g VTX Support IRC protocol, PIT/ 25/100/200/500mw adjustable, 48 frequency
  • Mounting Holes: 20x20mm(M2)
  • Size: 26x26x21mm
  • Weight 16.5g (Including Wire and screws)


STABLE V2 F4 Flight Controller Specs:

  • Model:STABLE F4 30A
  • MCU: F405
  • IMU: MPU6000 gyro/accelerometer (SPI)
  • OSD: BetaFlight OSD w/ AT7456E chip
  • Baro:NO
  • BEC Output: 5V@3A
  • Integrated LC Filter
  • Firmware target: OmnibusF4SD
  • Size: 26x26mm board, 20mm mounting holes (M2)
  • STABLE V2 F4 ESC 2-5S 4in1 Specs:

STABLE V2 F4 ESC 2-5S 4in1 Specs:

  • Input:2-5s lipo
  • Constant:30Amps
  • Burst:35Amps
  • Dimensions:31*31mm(including the power pads)
  • Mounting Holes:20*20mm,M2
  • Supports Dshot600,Proshot,Oneshot,Multishot
  • Current meter: Yes
  • Target: G_H_30
  • STABLE F4 5.8g 500mW VTX Specs:

STABLE F4 5.8g 500mW VTX Specs:

  • Input voltage: 5V
  • Channel: 48
  • Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 500mW
  • Size: 24 * 26 mm
  • Mounting Holes Dimension: 20mm x 20mm
  • Connector type: MMCX Connector
  • BEC Output:5V/1A for Camera of FC
  • Weight: 2.3g
  • Traditional button
  • IRC Tramp protocol


  • 1x F4 Flight Controller
  • 1x BLheli_s 30A 2-5S ESC
  • 1x 5.8g 500mW VTX
  • 1x Antenna
  • 1x Capacitance
  • 5x cable set
  • 4x M2*28mm screw
  • 16x Soft silicone


The use and operation of this type of product in many countries may require a license and some countries may forbid its use entirely. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Custom Quads cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.