The Recon line of panel goggles are a great entry level FPV headset. They are simple, affordable, and have an ultra-immersive FOV. The Recon V3 has an integrated four band, 32-channel receiver, and USB charging. It puts ease-of-use first and lets pilots focus on the full FPV experience without worrying about extra charging cables or accessory components.
Version 3 of the Recon Goggles is a very mature design. It has an included onboard DVR, uses an integrated channel scanner to pick up the strongest video feed and has an improved 800 x 480 TFT resolution display for a crisper image. The onboard OSD shows video signal strength, battery lifetime, and selected channel. The Recon V3 is the ideal choice for a new pilot looking for a complete, high-quality headset.
- FOV (field of view): 55°
- Format: 16:9
- Display: WQVGA 4.3inch display
- Resolution : 800 X 480 TFT
- DVR: analog video recording
- SD card support to 32GB (AVI file)
- Support playback recording file
- Firmware upgrade via SD card
- 40 channels, single high sensitive receiver including RaceBand frequencies(auto scan and find strongest channel)
- channel info, RSSI info and battery status (disappear after 4s, press any button to show up)
- USB charge port
- Micro-SD card slot
- 1x Recon V3 Headset
- 1x 5.8G dipole antenna
- 1x 18650 2600mAh Li-ion Battery(built-in headset)
Notes: Exposing the lens to direct sunlight will result in LCD damage.
- Batteries should NEVER be left unattended while charging.
- Be absolutely sure that the Lithium Polymer charger settings are correct for the battery pack being charged – both voltage and current settings.
- Lithium Polymer must be CHARGED and STORED in a fire-safe container like a Lipo Sack.
- Do not charge batteries near flammable items or liquids.
- Keep a dry fire extinguisher nearby or a large bucket of dry sand, which is a cheap and effective extinguisher.
- Never charge inside an automobile even when parked.
- KEEP BATTERIES AWAY from children and pets at ALL times.
- Never discharge below 3.5V per cell as it may cause permanent damage and void warranty
- Battery may explode if damaged or disposed of in fire
- Never leave batteries inside a car on a hot day or any other place where temperature may exceed 140F / 60C.
- Although environmentally friendly, lithium polymer cells must be FULLY discharged before disposal. Use a resistor setup (light bulbs, for example) to accomplish this, to avoid the possibility of a short-induced fire after disposal.
- Immediately discharge damaged batteries at 1/2 C rate and dispose
- Do not put the loose cells in a pocket, bag, or drawer where they could short-circuit against other items, or the battery tabs could be pressed against each other.
- Take care that the cells are not punctured, especially by metallic objects like hobby knives.
- If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention for this, or for burns.