iFlightRC Nazgul 5" V2 FPV Drone

  • Sale
  • Regular price $379.00
Tax included. Shipping calculated at checkout.


Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!

  • Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
  • To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
  • Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
  • Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

FEATURES:

  • 5mm arm design for more durability
  • Easy-Swap arms
  • LED illuminated Logo
  • XING-E 2207 motors and NAZGUL 5140 props
  • 5" version also fits 5.1" style propellers
  • Popular True-X configuration
  • TPU crash-guards
  • Fits both 30.5x and 20x stacks

SPECIFICATIONS:

XL5 V5 frame specs:

  • SucceX-E 45A V2 2-6S BLHeli_S 4-in-1 ESC
  • SucceX-E F7 V2.1 Flight Controller
  • XING-E 2207 FPV Motor (6S 1800KV / 4S 2750KV)
  • Wheelbase: 240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 393.4g (without battery)

FC // SucceX-E F7 Flight controller

  • MCU: STM32F22RET6 216MHz
  • Gyro: MPU6000
  • Baro: DSP310 (Barometer can only be used with Betaflight 4.3.0 and above)
  • OSD: IFLIGHT OSD (AT7456E)
  • BEC: 5V 2.5A
  • BlackBox: 16MB
  • Uart: 4*UART(UART1、UART2、UART4、UART5)
  • UART1 for VTX HD(for 4-6S Vista,for 4S DJI Air Unit)/AnalogTelemetry
  • UART2 for Receiver
  • UART4 for Free 
  • UART5 for ESC Telemetry
  • 4×Dshot/PWM outputs
  • Smartaudio & IRC Tramp VTX protocol supported
  • WS2812 led Strip: Yes
  • Bepper: Yes
  • Firmware: IFLIGHT_SUCCEX_E_F7
  • Outer Size: 36*36mm / 30.5*30.5/φ4 mounting
  • Weight: 6.9g

ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

  • Dimension: 36*43mm
  • Mounting Holes: 30.5*30.5mm/Φ3mm
  • Weight: 15g (without wire)
  • Supports 2-6S Lipo input
  • EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware
  • Current sensor: YES
  • BEC: NO
  • onstant: 45A / Burst: 50A
  • Supports: DShot150/300/600/MultiShot/OneShot etc.
  • Target: G-H-30 BLS 16.7

VTX// SucceX Force 5.8g 800mW VTX Adjustable

  • The output power is stable;
  • Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;
  • Output 48 frequency points, 
  • Frequency lock fast, the boot does not interfere with companions;
  • Built-in output power self-check function;
  • Full format video format: NTSC /PAL;
  • Wide input voltage range. low power consumption:
  • 7V~36V,+12V/380mA@800mW;
  • Small size:36*36*3mm
  • Mounting holes 4-M3
  • Lightweight: 7.2g(excluding antenna)

    INCLUDES:

    • 1x iFlightRC Nazgul 5" 4S FPV Drone - PNP
    • Prebuilt and tested Quadcopter
    • 1x XL5 V5 Frame
    • 1x Caddx Ratel, 2.1mm lens camera
    • 1x Albatross RHCP SMA 5.8g antenna
    • 2x Sets Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
    • 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
    • 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

    Notes: 

    • Our current frsky receivers default version in 2.XX, requires to use the same version of frsky transmitter. 
    • If you have none frsky transmitter,please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.

    Revisions:

    • May 31st,2021: Before SucceX-E F4 Stack changed to SucceX-E F7 Stack.
    • June,2021: Before Caddx Ratel camera changed to RaceCam R1 Mini camera.

    FPV REGULATORY NOTICE:

    The use and operation of this type of product in many countries may require a license and some countries may forbid its use entirely. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Custom Quads cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.

      Customer Reviews

      Based on 1 review Write a review